800kw Kaplan Turbine Micro Hydro Generator For Micro Power Plant
overview
Kaplan turbine also known as axial flow Turbine is developed in
1913 by the Austrian professor Kaplan.Its invention allowed
efficient power production in low-head applications that was not
possible with Francis turbines.The feature of Kaplan turbine is the
water flow passes through the runner axially.Kaplan turbines are
widely used throughout the world for electrical power production.
They cover the lowest head hydro sites and are especially suited
for high flow conditions.Kaplan turbine is a kind of turbine suit to low water head 2-50
meters, and with certain big flow, normally divided into fixed
blades and adjustable blades turbine. Main components including:
runner, draft cone, water chamber, guide vane, bearing, and main
shaft. The spiral case could be steel or concrete. The runner
diameter we can manufacture is from 60cm to 4meters, with rated
output 50Kw to 20Mw.
Turbine units normally be vertical shaft arrangement. Generator
equipped with same or different shaft, with Anyway, they will share
the same rotating speed. If specially required, a speed increase
gear could be equipped between turbine and generator in order to
smaller the generator size.
advantage
The Axial water turbine((Kaplan)) is suitable for low and medium
heads from 2 to 30 meters.
The runner blades are fixed or adjustable.
The fixed blade propeller water turbine is used for medium and
small sites with small variation of head and load, and the Kaplan
turbine is used for medium and large sites with large variation of
head and load.
Kaplan turbine is the most widely used water turbine for low head
run-off-rive small (200KW-3000KW) hydro power plant with its simple
structure and big flow discharge capacity.
Specification
| Name | 800kw Kaplan Turbine Micro Hydro Generator |
| Water Head | 19.0m |
| Runner Diameters | 1.1 m |
| Capacity2 | 800KW |
| Frequency | 50HZ |
| Generator Voltage | 400V |
| Layout pattern | vertical |
| Material(blades) | Stainless Steel ZG0Cr13Ni4Mo |
| Excitation | Brushless |
| Generator Insulation | F/F |
| Lifespan | 50 years |
Why choose us?
1. More than 20 years of industry experience, install commissioning
more than 150 equipment each year
2. Provide complete proposal for hydro power plant from water to
wire
3. Abundant foreign power plant project implementation experience
such as France, Japan, USA, South Africa, Sri Lanka, Iran,
Southeast Asia
4. Design and manufacture of hydro power generator with voltage
400V,6.3KV . capacity exceed 1000kw with 400V
FAQ
1.You are a trading company or a manufacture?
We are a hydro turbine generator manufacture with over 20 years of
experiences, Our factory is in the Sichuan you will take 2 hours
driving after you reach Shuangliu Airport, pay a visit to our
factory you will know more about us.
2.What Kind of water turbine should I choose?
We need to know water head, flow rate, voltage level, frequency,
on-grid or off-grid running, automation level from you to work out
the solution
3: Can you do the EPC for the hydro power plant?
Yes, We can design, producing and install the equipment, we will
dispatch technologist and workers to install the equipment.
