Small Hpp Hydro Pelton Turbine for water head 180m 50HZ on gird

1. Nozzle and Flow Regulating Arrangement (Spear)
Nozzle is used to increase the kinetic energy of the water that is going to strike the buckets or vanes attached to the runner.
The quantity of water that strikes the buckets is controlled by spear. The spear is installed inside the nozzle and regulates the flow of water that is going to strike on the vanes of the runner. A nozzle containing spear is shown in the figure given below.
The spear is a conical needle present in the nozzle. It is operated by a hand wheel or automatically in an axial direction.
When the spear is move backward the rate of flow of water increases and when it is pushed forward the rate of flow of water decreases.

2. Runner and Buckets
Runner is a rotating part of the turbine. It is a circular disc on the periphery of which a number of buckets evenly spaced are fixed.
The buckets are made by two hemispherical bowl joined together. Each buckets have a wall in between two hemispherical bowl called splitter.
The splitter splits the jet of water striking the buckets into two equal parts and the jet of water comes out at the outer edge of the bucket.
The buckets are designed in such a way that the jet of water strike the buckets, deflected through 160 degree to 170 degree.
The buckets of the Pelton turbine are made up of cast iron, cast steel bronze or stainless steel.

3. Casing
It prevents the splashing of the water and helps to discharge the water to the trail race. It also acts as a safeguard in the case of any accident occurs.
Cast iron or fabricated steel plates are used to make the casing of the 1000kw pelton hydro turbine generator.

4. Breaking jet
When the jet of water is completely closed by pushing the spear in forward direction than the amount of water striking the runner becomes zero. But still the runner keeps moving due to the inertia of the runner.
In order to stop the runner in the shortest possible time a small nozzle is provided which directs the jet of water at the back of the vanes. This jet of water used to stop the runner of the turbine is called breaking jet.

Hongya Power Generating Equipment To Utilities Limited, is founded in May, 2003 as a professional manufacturer of water turbine generator set. The company is located in a great place which surrounded by Mount WaWu and Emei, a place closed to many famous scenic spots such as Leshan Giant Buddha. The total company land is about 70000 Square meters, construction part 35000 Square meters. The employee is about 200 workers, which the R&D part is 25%.

Till now, HPGE offer a comprehensive range of hydroelectric power plant solutions that cover the entire scope of service including: Small hydro power project consultant; Site management studies; equipment Design; Hydroelectric equipment Manufacture; Project management; Installation guidance; Commission and start operation; Operation guidance; Hydroelectric equipment maintenance.

Products of HPGE are widely used in all around China, we cooperate with more than 300 hydro power plants with more than 600 turbine generators sets , including Francis turbine generator set, turgo turbine generator set, pelton turbine generator set, Kaplan turbine generator set, areas covering more than 20 provinces of China and also international markets such as Russia, Belarus, Turkey, Albania,Vietnam Indonesia, Nepal, Laos, Sri Lanka, Cuba and Brazil etc.

 


Established in 2003, Hongya power is an international company offering tailored solutions for “small”hydroelectric developments. Hongya power complete water to wire package includes design, manufacture,installation & commissioning.

Hongya power offers a range of hydroelectric turbines capable of generating up to 20MW from a single unit. The range consists of Pelton, Francis and Turgo turbines and includes compact solutions for the 50kW to 10000kW market.

Drawing on the vast experience gained from over 30 years of designing, manufacturing and commissioning hydro schemes, Hongya power excels when it comes to servicing and plant modernisation –from single part replacement to fully rehabilitating whole installations back to their optimum working

efficiencies.

Hongya power exports to over 30 countries from the original headquarters in Yuping town, Hongya county, China. With thousands of installations around the world, Hongya power continues to demonstrate the ability to be sensitive to regional differences and requirements, designing, manufacturing, and installing customized engineered solutions for their clients. This coupled with a corporate commitment to invest in research and development, software, hardware, and people, allows Hongya power to improve products to best serve their clients and the Hydropower market.